Your roof is an important component of your house because it protects your family from inclement weather, excessive temperatures, and troublesome pests. However, frequent roof inspections are necessary to maintain your roof in fighting shape. Roofing inspections will look for any problems that need to be fixed, anything that is out of position, and if your roof is standing the test of time. But how does this differ from a standard house inspection, and how frequently should you evaluate your roof? 

Here is the crucial information you should know about roof inspections.

Some of the reasons you should hire a professional Goldsboro roofer to inspect your roof include the following. 

• An annual examination
• If you discover leaks coming from the ceiling.
• If there has been a recent storm that featured severe winds, debris, and heavy rain or snow.
• If you’re getting your home ready for hurricane or snow season.
• If you are planning to sell or refinance your home.
• If you recently acquired a property without having it inspected.
• If your insurance carrier has ordered a roof check.

A roof inspection should ideally be scheduled at least once a year. It is advisable to handle this task at the beginning of fall or spring before the amount of rain and snow increases. By conducting yearly inspections, you can discover roofing problems early and save costly repairs. If you recently bought a home and the roof was last examined when it was erected, you should ask for a roof inspection, especially if you didn’t get a home inspection during the buying process. 

Your roof may be functioning on borrowed time after ten years or more without a professional roof inspection.

The roofing materials, such as shingles, metal plates, clay, or even slate shingles, will be the focus of the material component of the roof inspection. The inspector will inspect them for any defects, missing items, rust, moss, or water damage discoloration. The material examination also involves looking for evidence of leaks, fractures, or pests in the flashing beneath the roofing material.

The inside component of the examination will focus on any symptoms of roof damage that are not evident from the outside. Inspectors will examine the ceilings, attics, and even the property’s walls. Typical symptoms will include wood rot, water stains, mold, holes in the walls or ceilings, pests in the attic or beams of light entering the attic from the ceiling.

When the roof inspection is over, the roof inspector should provide you with a detailed report on their findings. They can also walk you around the house to point out any indicators of damage that they observe without putting you onto the roof if feasible. Each firm will very certainly have its own reporting system. The report will include the roof’s condition, required repairs, worries about the roof collapsing, and how long the roof is expected to endure.

If you want a roof inspection conducted on your home, contact Lanes Contracting today!

Your roof is one of the most critical factors that keep you dry and safe from the elements. Unfortunately, it can damage in severe weather, such as hail storms. Identifying this damage can be challenging and often must be noticed for a long time. 

Depending on the wind speed, size, direction, and material of the roof, the damage caused by hail can vary. In addition, the slope, age of materials, and the speed of the storm can affect the damage caused by hail. The damage can lead to various issues, such as leaks. 

While damage can be categorized into functional or cosmetic, cosmetic injuries can lead to more severe outcomes. These include bruises, granule loss, broken edges, puncture wounds, and broken windows. Before it’s too late, it’s essential to identify the signs of hail damage on your shingles and seek professional roofing contractors if needed. Here are some of the signs related to this type of damage. 

Sometimes, bruises are the result of hail damage to your roof. It can be hard to identify these types of damage, especially since they usually appear on the surface. You can tell it has been damaged by touching it, which feels like it has been slapped. If you see a bruise, gently press it down to see if there’s any give. If it gives way, it could signify that the roof is starting to deteriorate. 

Some of the most common signs of hail damage are small round or tear-shaped marks on your shingles’ surface or metal flashing. You can also see pitted areas where the hail damaged the roof. 

When granules have become loose, your shingles can become brittle and weak. During a hailstorm, these conditions can lead to cracks and curl in your shingles. You can inspect your roof for cracks by running your hand over some shingles. While other factors, such as hail damage, can cause cracks in your shingles, cracks are usually the result of hail damage on asphalt. 

Some of the reasons why granules can fall off or become loose are due to various factors. If you notice a lot of them in your gutters or downspouts after a hailstorm, you might have hail damage on the asphalt shingles on your roof. It would be best if you climbed up on your roof to inspect for missing granules. 

You have hail damage if you notice plywood sheathing or exposed roofing felt. You should also pay close attention to the storm’s direction, as your shingles may show damage if they’re in the path of the hail. 

Although some hail damage can be cosmetic, other types can lead to more severe issues. For instance, if you have damaged or broken shingles, they can no longer keep water away from your home. It can cause water to seep into your home’s decking or underlayment. If you think you have hail damage, get in touch with us. We have developed a product that can rejuvenate and protect your shingles, giving them the strength to withstand hail. 

The primary function of your roof is to protect the things and people beneath it from the elements. Unfortunately, it can get damaged or even destroyed due to the elements. It can lead to many heartaches, stress, and costly repairs. Depending on the severity of the issue, you might have to have your roof replaced or fixed. 

Storm damage can leave your roof vulnerable to further damage and leaks. It can also lead to insecurity and frustration, making your home unstable and undependable. Knowing the causes of roof damage can help you prevent it from happening in the first place. 

In this article, we’ll talk about the various types of storm damage and how it can affect your roof. It will also teach you how to prevent it from happening and how you can identify if it has already happened. Having a good understanding of the damage can help make your home more secure. 

One of the most common reasons why roof damage occurs is due to the wind. The structure of your roof is designed to allow water to run off. It comprises materials such as metal, clay tiles, and asphalt shingles. The layers of these materials can be vulnerable to wind damage. 

The wind can hit your roof in unpredictable ways. Repeated and sudden gusts can tear, shake, and bend your roof’s materials. The wind’s strength can come from a single direction or several directions, which can cause parts of it to take repeated beatings. 

Aside from the wind damage, high winds can also cause debris to fly around and damage your roof. One of the most common types of damage to a roof is when tree limbs break and fall on it. 

If your roof is made of asphalt shingles, you might notice signs of storm damage. If the shingles start to pull away from the structure, they might have cracked, and some of them can end up in rain gutters. If your roof is made of clay tiles, you might notice that the tiles are starting to break apart. Metal sheets may also be coming away from the structure. 

Trees falling on your roof due to the powerful winds from Hurricane Sandy can lead to residential property damage. It can be hard to tell if your roof has storm damage. The damage may appear subtly or be hidden beneath the surface. Water damage can also be below the surface of a metal roof. 

Even though a hurricane or strong storm can cause damage to your roof, there are still ways to prevent it. If there’s a lot of snow on your roof, you must remove it. However, this can be very dangerous, and you should hire a professional. 

You should hire a professional to cut down the tree limbs hanging over your roof. Having your roof inspected by a professional can identify areas of vulnerability. One of the easiest ways to prevent further damage is to have the shingles replaced or fixed. 

You can also look into various rejuvenation options for your roof. For instance, if you have an asphalt shingle roof, a rejuvenation process from our team can add five years to its life expectancy.

Contact a Raleigh roof contractor for more details.

The reputation of a roofing company can be negatively affected by the work that it does and the actions of its contractors. Identifying if you have a problem with a contractor is essential before you agree to any work. These are signs you should look for before agreeing to any work on your roof. They can help you avoid getting a bad deal on a new roof. They include: 

The ventilation system of your attic is essential to the longevity of your roof. Without it, the cold and hot air will get trapped in the attic and shorten its lifespan. Poorly ventilated attics are another sign of a poor roofing job. Hot air can burn your roof up, which can cause the adhesive on your decking to deteriorate and the shingles to curl or crack. 

Meanwhile, trapped cold air can combine with the moisture and heat from your home to form condensation. It can cause your roof’s decking to swell, turning it into a wavy surface. Even if the trapped cold or hot air is not causing your issues, you still need proper ventilation to avoid further problems. To avoid this, ask your contractor if they can access your attic during their inspection. 

Your home’s entire roof system relies on the wooden foundation of your roof decking. When replacing your roof, your contractor should inspect the integrity of the decking to ensure it’s still intact. 

If the contractor doesn’t replace the decking, it indicates that the job got poorly done. The sagging of your roof can be caused by the need for proper weight capacity for the new materials you’re replacing. If the old decking is still intact, it can also cause mold and mildew to develop. 

Before you start replacing your roof decking, ensure that the contractor knows how much work will need to be done to remove the old decking. You should be fine if the contractor says they’ll replace the old decking. 

A properly functioning roof system is composed of various components and materials. One of the most common signs of a poor roofing job is the need for these crucial components and materials during the installation. 

A properly functioning roof system is composed of various components and materials. These include roof decking, metal roof flashing, water shields, and underlayment. Other components include roof vents, Ridge capping, and pipe boots. 

You’ll likely have issues if your new roof is left without these components. Doing so could be because the contractor needed to be more active or because they were cutting corners to finish the job faster. 

One of the main reasons why a roofing contractor might leave out a component or material during the installation is to make their prices cheaper. If they do this, you’re signing up for a poor job. Before you agree to work with a roofing contractor, ensure they include all necessary materials and components in their estimate. 

If your roof’s uneven or has a non-uniform appearance, you most likely need a better roofing job. Some common signs are lifted shingles, a bumpy or wavy look, and other non-standard roof components. 

It could be caused by poor craftsmanship, improper driving nails, or cutting corners. Although this sign is mainly about appearance, your roof could leak eventually due to the issues that caused it. 

A sign that a poor roofing job got carried out is when your roof leaks after rain. Although this isn’t always the case, it could be because the installers made a mistake or there was an area that needed to be flashed properly. When a roofing contractor informs you that they leak, they should immediately come out and fix it. It’s important to note that they should immediately address the issue if they’re a reputable company. 

If the contractor refuses to take responsibility for the issue or doesn’t acknowledge your call, more of your roof might have gotten installed incorrectly. This first sign is not necessarily a sign of a poor job. It’s the reaction of the contractor after learning that a leak developed following the installation. 

Getting ready for the winter season is a standard checklist everyone must complete. Aside from moving outdoor furniture, preparing for winter can also involve putting away garden tools and preparing for the cold weather. 

Before you start preparing for winter, it’s essential to check your roof. The weather can affect the quality of your roof’s shingles. The summer season can cause them to get hot, and the spring and fall rains can also cause them to get damaged. 

The winter season can also pose various challenges to your roof. Are you ready for the cold and snow that will come? Ice and snow can cause significant damage to your roof. This checklist will help you prepare for winter and keep your roof in good condition. Doing so can help avoid costly repairs later on. 

Having proper insulation in your attic can help lower your heating bills. It can also prevent the heat from coming to your shingles, which can lead to the development of ice dams. 

Without proper ventilation, air can get trapped in your home and contribute to the development of structural problems. During the summer season, proper roof ventilation can help prevent heat damage. In the winter, poor ventilation can cause a buildup of moisture and freeze. 

If you have a lot of snow on your roof, you must remove it now instead of waiting for it to melt. One way to do this is by using a snow rake. Be careful of tripping hazards and ice, as the snow may still melt. 

When wet snow falls, the weight of the snow can break the tree limbs on your roof. To avoid further damage, remove the limbs from your roof. 

The leaves that came from the fall and the coming snow can combine to create a potential disaster. If the debris from the leaves backs up into the gutters, it can cause severe damage to your roof. Also, ice dams can form due to the buildup of ice. 

Besides cleaning out your rain gutters, you should also ensure they’re secure. Gaps between the structure and the gutters can lead to drips and create dangerous ice patches. 

With the winter season coming, your roof should be in good condition. If you notice that your shingles are missing or damaged, it’s crucial that you immediately replace them. Water damage can lead to significant structural issues if it gets through your roof. 

One of the most critical steps that you can take to ensure that your roof is in good shape for winter is to schedule an inspection. It will allow a professional to thoroughly inspect your roof and identify areas where it needs to be improved. 

Aside from preparing your roof for the winter, there are other things you can do to improve its performance. One of these is roof rejuvenation, which can help restore the natural ability of your shingles to perform. For a fraction of the cost, you can get five years of life out of your roof with this process.

If this sounds good, our team of qualified Raleigh roofers can help you by rejuvenating your roof. 

Every shingle on your roof is essential, but there are times when it can go missing. It can happen due to various factors such as wind, rain, and falling trees. If you had a professional install the shingles, they might eventually come loose and cause a problem. Although a few missing shingles might look bad, the question is whether they can cause leaks. When it comes to missing shingles, it’s essential to determine if they’re just an eye sore or causing water damage. 

Even if damage to your roof affects only a few parts of it, it does not matter as long as the whole structure is intact. Some asphalt shingles have three sections; during intense weather, one can get ripped off. Since this is not usually possible to repair, replacing the entire shingle is required. 

If you lose a whole shingle instead of just one or two of them, it is likely that your roof will stay intact. The location of the missing shingle will determine whether or not it will leak.

To be a hundred percent sure, it is best to schedule an inspection, so your roof is ready for winter and the risk of water damage is minimized.

Usually, the seams between the two shingles are spaced in a staggered manner. If the roof ends up with more than one or two of these seams exposed, it might allow water to come out. 

The valleys are also essential parts of a roof. They are areas where two low parts meet. If a shingle is missing at a low point, it can cause debris and water to collect in the valleys, increasing the chances of a leak. 

Although possible that missing shingles could lead to a roof leak, it’s not always the case. The amount of time that the shingles have been missing and how much rain has fallen will determine how much of a leak it can cause. The installation of shingles and how they are laid will prevent a leak from happening immediately. Also, water must go through the roof decking and the underlayment before entering your home. 

If left exposed for a long time, a leak can occur, and the wood used for the decking will rot. A roof leak can also happen if nails get stuck in the missing shingles. Lifted nails can be caught by the water and then go down into your home. If you notice missing shingles, you should immediately contact a roofing contractor. Before calling a roofing contractor, you should inspect the area where the damage occurred. You’ll get a better idea of the scope of the issue and how it will get addressed. 

A missing shingle might not cause a leak immediately; however, it can affect the surrounding shingles over time if they deteriorate due to sunlight, wind, and water exposure. The older your roof is, especially if you have multiple layers of shingles, the greater the chance of experiencing progressive leak damage. 

One of the most critical steps that you should take when it comes to fixing a leaking roof is to replace the missing shingles immediately. It will prevent water damage to your home’s interior areas, such as the attic and the insulation. 

Unlike extensive replacements, which are usually carried out on a large scale, professional roofers can also perform minor repairs. One of the most common reasons why people hire a professional is because they can find new shingles that match the originals’ color and texture. They can install these without affecting the surrounding area. If there are other issues with your roof, they should get fixed immediately.  

After a storm, you might notice missing shingles on your driveway or lawn. Although you can see the bare spots on your roof from the ground, regular inspections are also recommended to check for other issues.

Any roofing company will typically provide their clients with a warranty when they do a roof repair exercise. The warranty often covers the roof’s functionality and materials used. Such companies are always at the forefront of looking for their client’s best interests. Warranties are a sure way to ensure a homeowner’s roof is protected against any damages that may result from poor workmanship and expertise from a roofing contractor. But how long should a roof repair be guaranteed for? Below are some of the aspects that determine how long roofers can guarantee a roof repair.

When a roofing contractor does a roof repair, the company will often provide a warranty for the materials used. The warranty will always cover the repaired sections of a roof if it is proven that damages did not occur from a homeowner’s negligence. Conditions that could be covered under a roof repair warrant include missing shingles, broken tiles, and loose shingles, among others. 

Neglect from homeowners or poor maintenance causes the most significant problems common with roofs. Some of these problems include gravel on the roof, unprofessional roof repair by a homeowner, or leakages into the roof. In many cases, warranties cover a piece of tile replacement yearly for all repairs. This comes in handy in helping injury to homeowners who try to fix tiles by themselves. 

Roofing companies will always provide roof repair warranties based on the material used and the contractor’s service.

A manufacturer warranty is the primary type of warranty for roof shingles repairs. Standard asphalt shingles will always come with a thirty-year warranty. However, there are manufacturers that offer up to fifty-year warranties as well as lifetime, depending on the agreement. In this case, the manufacturer’s warranty will cover the material used for a roof repair. 

When a homeowner decides to claim a warranty against a roof repair, they should remember that the cost of disposal will not be covered. In addition to this, a typical manufacturer warranty does not often cover workmanship. Therefore, homeowners can choose to upgrade their warranties to incorporate other secondary aspects, such as workmanship and third-party effects. 

On top of manufacturer warranty, many roofing companies offer their clients coverage for workmanship. This type of warranty will often differ from one company to the other. Roofing companies will cover their roof repair works so that in case a problem occurs as a result of the roof fixing the homeowner can claim a free repair from the contractor. 

A homeowner can secure this warranty by getting regular inspections, sticking to their original roofing contractor, registering their warranty, and going through the fine print. 

Roofs exist to protect the members of a home from extreme weather conditions. When it comes to roof repairs, it becomes essential for homeowners to protect their warranties. In many cases, roof repair warranties will cover different aspects which last for specified periods as agreed in the contract. Combining manufacturer and contractor warranties can help homeowners enjoy a prolonged roof repair warranty. 

If you are a homeowner or a commercial building owner, the last thing you’d want to experience is a collapsed roof. A roof collapse is by no means a small problem. Collapsing roofs can cause severe injuries to occupants, damage to the building, and result in a total business shutdown. What if there were visible signs indicating the imminent collapse of the roof that were ignored? This article will examine some of the warning signs that people can observe to realize a roof is on the verge of collapsing. 

One of the visible signs that depict an impending roof collapse is bent conduits and utility pipes. There are conduits that run from the roof into the occupied rooms, such as water pipes. When a roof is about to collapse, its weight might lay on the pipes and conduits, making them sag or bend. Therefore, when people spot bent pipes, especially on the top floor, they should take precautions and inform the management to investigate the cause, as it could indicate a roof is about to collapse.

The sagging of shingles and ceilings is another significant concern when a roof is about to collapse. When the weight of a roof starts acting on the ceiling, it will cause it to sag, which is visible to people in a room. More so, people can spot a sagging spot on a residential roof when walking or conducting periodic maintenance. The sagging of a roof is the best way to notice the impending danger of collapse.

When one notices that doors and windows that were initially easy to open have become screechy and challenging to open, this could be a possible indicator of a roof that’s about to collapse. Roofs that are about to collapse may exert weight on one side of a house wall, making the windows lock firmly. Also, this may result in windows cracking and window outlines bending. These are critical indicators of a failing roof, and the homeowner should inform the local contractor to take corrective actions fast to avoid further damage.

Another common sign that a roof is about to collapse is a leaking roof. A roof that leaks severely has been weakened by the sipping water causing it to lose its structural strength. Such roofs are not firmly anchored to the building, and an external force such as wind or hail can easily bring it down. Therefore, leaking roofs should be attended to immediately to avoid further damage that might fail at unexpected moments.

Many houses are designed using masonry walls which carry the weight of the roof and distribute it to the foundation. In a case where a roof is leaning on one masonry wall, the weight can cause cracks.

This is a clear indication of an unbalanced roof that could collapse.

If you are looking for roofing contractors in Raleigh, NC, we have the experience of spotting all of the indications of an unstable roof before it is too late.

The signs mentioned above are some of the standard identifiers of a roof that is about to collapse. Homeowners, business building owners, or occupants must be educated on identifying such signs to keep them aware of their surroundings. This can help avoid fatalities, extensive damage to property, and loss of business, resulting in huge losses. 

If you spot any of these signs, please consider the available financing options for a new roof before it is too late.

When a roof is installed, homeowners often expect them to last for years without encountering any problems. A roof is often warranted for up to or over thirty years, giving homeowners confidence in it. However, external factors can result in roof shingles coming off a roof. So when shingles come off, it becomes necessary to understand the reason behind the phenomenon. This will help homeowners take preventive measures to avoid the occurrence of the same situation in the future. This blog offers a guide to some of the reasons why roof shingles come off the roof.

There are numerous roofing problems that buildings get exposed to. With our nearly two decades of experience as a Raleigh roofing company, we have noticed that depending on the roofing structure, common ones include the following:

When sourcing roof shingles, it is important to purchase quality shingles of the right type from trusted manufacturers. Shingles are designed to resist impacts that a roof is subjected to on a daily basis. However, weak and low-quality shingles can easily be blown off a roof by an external force such as wind. Therefore, one of the main reasons why shingles come off from roofs is the installation of low-grade shingles by a contractor.

Typically, shingles are designed to remain intact on roofs under normal winds. However, the weather is always unpredictable. Some regions may experience extreme winds, which could damage or blow away quality shingles from roofs. These winds can go extremely high, beyond what manufacturers design shingles for, and there is no chance the roof can stay intact in such cases.

Flashing gets the installation done in the roof’s weak areas to protect connections like skylights and chimneys. The flashing material gets made of aluminum, plastic, or steel, and the connections are left vulnerable to moisture and water when it cracks. When adequately attached, you stay stress-free from any problems around the connections area.

Another reason roof shingles come off the roof is the poor installation by roofing contractors. This is often experienced when a homeowner sources inexperienced or lowly-rated roofing contractors to carry out roofing in a bid to save on cost. This makes your roof susceptible to collapse over time. Unfortunately, this always results in catastrophic results since the shingles are subjected to easy wear and tear. This is so because they can easily come off even in average weather conditions such as normal wind and cause a roof leak.

Walking on a roof is another reason that can cause damage to shingles. The weight of humans can damage shingles since most of them are not designed to carry such weights. More so, on hot days, shingles expand and become brittle. When a person walks on them, they expose them to breakage. 

Shingles are designed to last for a period of time. This is often referred to as design life. When roof shingles exhaust their design life, they become weak. The asphalt used will dry out and starts to crack. Additionally, the shingles start to bend and become uneven. At this point, a slight trigger, such as wind, could easily result in shingles coming off the roof.

Like many constructions, roofs require periodic maintenance. This is important since a homeowner can identify any faulty section of a roof and repair it before the problem increases. Unfortunately, when homeowners fail to invite reputable roofers to carry out periodic maintenance, a problem with a single shingle can expand and affect other shingles. In the end, this can result in shingles falling out.

Shingles are a critical part of a roof. They must be installed professionally, monitored, and repaired on time when needed. Above are some of the reasons that could result in them falling off a roof. Understanding these reasons is essential for homeowners to find the best solution to rectifying the problem.